Digitus DN-95301 - Snmp

Format set static-mcast name <WORD>delete
Mode Global Config
snmp
1) snmp notify
This command configures snmp notification.
Format snmp notify {enable|disable}
Mode Global Config
2) snmp group
2.1) snmp group add
This command create a snmp group.
Format snmp group add <WORD>version <1-2>
Mode Global Config
2.2) snmp group delete
This command delete a snmp group.
Format snmp group delete <WORD>
Mode Global Config
3) snmp user
3.1) snmp user add
This command creates a snmp user.
Format snmp user add <user name> group <group name> version <1-
3>
Mode Global Config
3.2) snmp user delete
This command deletes a snmp user.
Format snmp user delete <WORD>
Mode Global Config
4) snmp community
4.1) snmp community add
This command creates a community.
Format snmp community add <community name> group <group
name> mgmt-ip <ip-addr>
Mode Global Config
4.2) snmp community delete
This command deletes a community.
Format snmp community delete <community name>.
Mode Global Config
5) snmp trapstation
5.1) snmp trapstation add
Create a snmp trap station.
5.1.1) snmp trapstation add <ip-addr> community <community name>
type bootup
Send trap when system reboot
Format snmp trapstation add <ip-addr> community <community
name> type bootup trap-version {1|2}
Mode Global Config
5.1.2) snmp trapstation add <ip-addr> community <community name>
type linkchange
Send trap when port link change.
Format snmp trapstation add <ip-addr> community <community
name> type linkchange trap-version {1|2}
Layer 2/2+ Management Switch Series 32