Digitus DN-95301 - Sntp

Mode Global Config
5.1.3) snmp trapstation add <ip-addr> community <community name>
type both
Send trap when system reboot or port link change.
Format snmp trapstation add <ip-addr> community <community
name> type both trap-version {1-2}
Mode Global Config
5.1.4) snmp trapstation add <ip-addr> community <community name>
type none
Send no trap.
Format snmp trapstation add <ip-addr> community <community
name> type none trap-version {1-2}
Mode Global Config
5.2) snmp trapstation delete
This command delete a trap station.
Format snmp trapstation delete <WORD>
Mode Global Config
sntp
1) sntp daylight
This command enables or disables the daylight saving configuration.
Format sntp daylight {enable|disable}
Mode Global Config
2) sntp localtime
Configure the local time.
2.1) sntp localtime enable
This command enables local time.
Format sntp localtime enable
Mode Global Config
2.2) sntp localtime localtime_date
This command sets local time.
Format sntp localtime localtime_date <year> <month> <date> <hour>
<minute> <second>
Mode Global Config
3) sntp server
3.1) sntp server enable
This command enables sntp server.
Format sntp server enable
Mode Global Config
3.2) sntp server ipaddr
This command sets sntp server IP address.
Format sntp server ipaddr <IP-addr>
Mode Global Config
3.3) sntp server polling
This command sets sntp server polling time interval.
Format sntp serve polling <0-9>
Mode Global Config
4) sntp timezone
This command sets sntp timezone.
Format sntp timezone <1-75>
Mode Global Config
Layer 2/2+ Management Switch Series 33