EasyManua.ls Logo

Digitus DN-95301 - Tacplus

Digitus DN-95301
51 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Note: This command only supports on the following switches,
3. 48-Port 100BaseTX + 4 1000BaseT with 2 shared Gigabit SFP Layer 2+ Management
Switch
4. 24-Port 1000BaseT with 2 shared Gigabit SFP Layer 2+ Management Switch
5. 48-Port 1000BaseT with 4 shared Gigabit SFP Layer 2+ Management Switch
1) dos land
This command enables and disables land-type attacks prevention.
Format dos land {enable|disable}
Mode Global Config
2) dos blat
This command enables and disables blat-type attack prevention.
Format dos blat {enable|disable}
Mode Global Config
3) dos syn-fin
This command enables and disables SYN-fin-type attack prevention.
Format dos syn-fin {enable|disable}
Mode Global Config
4) dos ports
4.1) dos ports smurf
This command enables and disables Smurf-TYPR attack prevention.
Format dos ports smurf {enable|disable}
Mode Global Config
4.2)dos ports ping-flooding
This command enables and disables ping-flooding-type attack
prevention.
Format dos ports ping-flooding {enable|disable}
Mode Global Config
4.3)dos ports synack-flooding
This command enables and disables SYNACK -flooding -type attack
prevention. Set rate is 64 kbps or 128kbps for port lists (1, 3-5, 7-9.11)
Format dos ports synack -flooding {enable|disable} rate {64|128} <port-
list>
Mode Global Config
e.g. Switch<Config>#dos ports synack -flooding enablerate 64 1-4
Switch<Config>#dos ports synack -flooding enablerate 64 5
tacplus
1) tacplus authen_type
This command is used to set authentication type. There are three types for
selecting: local, tacplus, localandtacplus.
Format tacplus authen_type {local | tacplus | localandtacplus}
Mode Global Config
2) tacplus add
This command is used to add a new TACACS+ server and set server IP
address, priority, key string, authentication port and timeout for reply.
Format tacplus add server <IP_addr> priority <0-65535> key <key string>
port <auth port id> timeout <1-30>
Mode Global Config
3) tacplus del
This command is used to delete a TACACS+ server.
Format tacplus del server <IP_addr>
Layer 2/2+ Management Switch Series 40

Other manuals for Digitus DN-95301

Related product manuals