DINGLI JCPT DCS Series - Platform Control Panel Buttons

培训手册 Training Manual
操作 Operation
JCPT-DCS
www.cndingli.com
2-9
the blue arrow points. Move the control handle in the direction indicated by the yellow arrow on
the control panel and the machine will move in the direction that the yellow arrow points.）
○
4 喇叭按钮（Horn Button）
按下按钮，喇叭响；放松按钮，喇叭停止。（Push the horn button and the horn will sound.
Release the horn button and the horn will stop. ）
○
5 起升功能选择按钮（Lift function select button）
按下按钮，才可以操作起升功能。（Press this button to activate the lift function.）
○
6 行走功能选择按钮（Drive function select button）
按下按钮，才可以操作行走功能。（Press this button to activate the drive function.）
○
7 行走速度按钮（Drive speed button）
按下按钮，来选择机器高速或者低速的行驶。（Press this button to activate the slow or fast drive
function.）
○
8 LED
故障显示和电池电量显示区域（Diagnostic read out and battery charge indicator.）
○
9 红色紧急停止开关（Red Emergency Stop button）
按下红色紧急停止按钮停止所有功能，拉出红色停止按钮才可以操作机器。（Push in the red
Emergency Stop button to the off position to stop all functions. Pull out the red Emergency Stop
button to the on position to operate the machine.）