培训手册 Training Manual
参数调整 Parameter Adjustment
JCPT- DCS
www.cndingli.com
4-6
2. PCU 操作功能选择模式（Options turn on or off）
2.1 PCU 进入功能选择操作状态(Access operation)
图示(Graphic) 说明(Instruction)
1. 按下并保持“起升”档和“乌龟”档；
(Press and hold “Lift” and “Turtle” buttons；)
2. 将“急停开关”从“OFF”位置拨到“ON”;
(Turn on the Emergency Stop button.；)
3. 直到数码管”
”闪烁;
(Until the “SC” is flashing on display；)
4. 释放“起升”档和“乌龟”档按钮；
(Release the “Lift” and “Turtle” buttons；)
5. 手柄Y轴，“Y轴-正半轴”推到最大位置，直到“ ”固定不
闪烁；
(Push the joystick forward to max. position until “ ”
stop flashing；.)
To Next Page
Loading...
