培训手册 Training Manual
参数调整 Parameter Adjustment
JCPT- DCS
www.cndingli.com
4-7
2.2 LMI 称重功能激活与关闭(OVERLOAD setting)
图示(Graphic) 说明(Instruction)
1. 按下并保持“起升”按钮，且LED显示绿色，数码管从“ ”
显示切换当前LMI功能选择状态；
(Press and hold “Lift” button until the LED is green, “
”
will be changed to “OVERLOAD” setting；)
2. 通过“左转向”按钮关闭LMI称重功能“
”，通过“右转向”
按钮激活LMI称重功能“
”；
(Press the left steer and display “
” to turn off the
OVERLOAD and Press the right steer and display “
”
to turn on；)
3. 释放“起升”按钮，且LED关闭，退出LMI称重功能激活与关
闭模式
(Release “Lift” button until the LED is off, quit the setting；)
2.3 防夹手功能激活与关闭 (Descend Stop setting)
图示(Graphic) 说明(Instruction)
1. 按下并保持“乌龟”按钮，且LED显示绿色，数码管从“ ”
显示切换当前防夹手功能选择状态；
(Press and hold “Turtle” button until the LED is green,
“
” will be changed to “Descend Stop” setting；)
2. 通过“左转向”按钮关闭防夹手功能“
”，通过“右转向”按
钮激活防夹手功能“ ”；
(Press the left steer and display “ ” to turn off the
OVERLOAD and Press the right steer and display “
”
to turn on；)
3. 释放“乌龟”按钮，且LED关闭，退出防夹手功能激活与关闭
模式
(Release “Turtle” button until the LED is off, quit the
setting；)
To Next Page
Loading...
Need help?
General
