DINGLI JCPT DCS Series - 退出功能选择状态并保存

培训手册 Training Manual
参数调整 Parameter Adjustment
JCPT- DCS
www.cndingli.com
4-9
2.5 退出功能选择状态并保存(Quit and Save)
图示(Graphic) 说明(Instruction)
1. 手柄Y轴，“Y轴-负半轴”推到最大位置，直到“ ”
闪烁，表示退出功能选择模式；
(Push forward the joystick to max. Position until the
“ ” is flashing；)

2. 按下“喇叭”和“手柄DEADMAN”,快速松开，直到蜂鸣
提示结束，参数保存；
(Press “Horn” and “Deadman” buttons very quick and
setting is saved after alarm over；.)
3. 参数保存成功后，数码管显示电池百分比状态；
(It displays the battery percentage after the setting is
saved.；)