DINGLI JCPT DCS Series User Manual

培训手册 Training Manual
参数调整 Parameter Adjustment
JCPT- DCS
www.cndingli.com
4-3
1.2 行走低速（Drive Low Speed）
图示(Graphic) 说明(Instruction)
1. 首先激活行走按钮，行走LED开启状态下，按下并保持“乌
龟”按钮，且乌龟LED显示绿色；
(Press the “Drive” button until the LED is green, press and
hold the “Turtle” button；)
2. 数码管显示当前慢速速度值；“
”表示50%速度；
(The display number means the slow drive speed; “
”
means 50% speed；)
3. 通过“左转向”按钮减少数值，通过“右转向”按钮增加数值；
(Press left steer button to reduce the speed and right steer
button to increase.；)
4. 释放“乌龟”按钮，退出慢速速度模式，返回到快速模式；
(Release “Turtle” button and done； )
1.3 提升后行走速度（Drive Elevated Speed）
图示(Graphic) 说明(Instruction)
1. 首先激活行走按钮，行走LED开启状态下，按下并保持“喇
叭”按钮；
(Press the “Drive” button until the LED is green, press and
hold the “Horn” button；)
2. 数码管显示当前高空速度值；“
”表示15%速度；
(The display number means the elevated drive speed;
“
” means 15% speed；)
3. 通过“左转向”按钮减少数值，通过“右转向”按钮增加数值；
(Press left steer button to reduce the speed and right steer
button to increase.；)
4. 释放“喇叭”按钮，退出高空速度模式，返回到快速模式；
(Release “Horn” button and done； )

DINGLI JCPT DCS Series Specifications

General

Brand	DINGLI
Model	JCPT DCS Series
Category	Scissor Lifts
Language	English