培训手册 Training Manual
参数调整 Parameter Adjustment
JCPT- DCS
www.cndingli.com
4-12
图示(Graphic) 说明(Instruction)
返回主界面
Return to main screen
进入 ECU /PCU/TM 诊断界面
Access to ECU/PCU/TM diagnose screen
进入工具设定界面
Access to tool setting screen
进入密码设定界面（密码：“4482”才能进入电位计校
验）
Access to password setting screen(The code “4482” is for
potentiometer recalibration)
进入故障记录界面
Access to fault record screen
进入参数设定界面
Access to parameters setting screen
进入机器设定界面
Access to machine setting screen
进入水平，电位计，牵引马达和称重校验界面
Access to tilt, potentiometer , drive motor and weight
calibration screen
3.3 进入水平，电位计，牵引马达和称重校验界面介绍( The introduction of tilt,
potentiometer, the drive motor and weight calibration screen)
To Next Page
Loading...
Need help?
General
