Dionex UltiMate 3000 - Page 22

UltiMate 3000 Nano and Cap- System Installation and Application
18
No. Description Part No.
1
Nano HPLC Capillary HPLC Micro HPLC Monolith. HPLC
1 Solvent lines (analytical) 6030.2548
2 Solvent lines from degasser to proportioning valve
(set of 3 including the appropriate fittings)
6035.2540
3 Connection proportioning valve to working pump head (including fittings) 6035.2514
4 Capillary from working pump head to equilibration pump head (including fittings) 6035.3014 (standard) or 6037.3011 (biocompatible)
5 Capillary from equilibration head to outlet unit (including fittings) 6035.3014 (standard) or 6037.3011 (biocompatible)
6 Inline filter (0.5 µm) in frit holder on outlet unit 6000.0045 (standard) or 6282.0022 (biocompatible)
7 Capillary from pump to flow splitter (short connection) 6035.2553
2
(standard) or 6037.2553
2
(biocompatible)
8 Capillary from switching valve to flow splitter (both in flow manager)
Standard
Biocompatible
6720.0033
2
6721.0033
2
6720.0034
2
6721.0034
2
6720.0035
2
6721.0035
2
6720.0034
2
6721.0034
2
9 Capillary from port 6 to port 8 of the switching valve
Standard
Biocompatible
6820.0015
2
6821.0015
2
6820.0016
2
6821.0016
2
6820.0018
2
6821.0018
2
6820.0015
2
6821.0015
2
10 Connection from switching valve (flow manager) to separation column Connect the column to the switching valve. If necessary, use the appropriate
connection parts from the respective Basic Configuration kit.
11 Separation column 160321
2
160295
2
160282
2
161409
2
12 Separation column outlet All columns have an inbuilt outlet.
13 Capillary for manual injection Included in Manual Injection Port,
part no. 6720.9007
2 (
standard) or 6721.9007
2
(biocompatible)
1
The part number refers to the packing unit. For more information, contact your Dionex Sales Representative.
2
These parts are included in the Basic Configuration Kit for the related application (→ section 8.1, page 64).