Need help?Do you have a question about the Dionex ICS-90 and is the answer not in the manual?
Routine maintenance procedures for the ICS-90.
Details common alarms and error messages displayed in Chromeleon.
Guides on identifying and resolving liquid leaks in the system.
Troubleshooting steps for pump priming issues.
Troubleshooting baseline noise or drift.
Overview of diagnostic and calibration functions via Chromeleon.
Instructions for installing Chromeleon software.
Steps to connect the ICS-90 to the computer via USB.
Procedure for priming the pump.
General| Type | Ion Chromatography System |
|---|---|
| Detection Method | Conductivity |
| Flow Rate Range | 0.01 to 5.0 mL/min |
| Column Temperature Range | Ambient +5 °C to 60 °C |
| Flow Rate Accuracy | ±1% |
| Flow Rate Precision | <0.1% RSD |
| Power Requirements | 100-240 V, 50/60 Hz |
| Pump Type | Dual-Piston |
| Pressure Limit | 5000 psi |
| Sample Volume | 5 to 100 µL |
| Operating Pressure | up to 5000 psi |
| Conductivity Detector Range | 0 to 10, 000 μS/cm |
| Temperature Control | Yes |
To Next Page
