1 • Introduction
Doc. 031851-05 12/04 1-7
1.3.2 Safety Labels
The TUV GS, C, US Mark safety label and the CE Mark label on the
ICS-90 indicate that the ICS-90 is in compliance with the following
standards: EN 61010-1:2001 (safety), CAN/CSA-C22.2 No. 1010.1-
92+A2:97 (safety), UL 3101-1/10.93 (safety), and EN
61326:1997+A1:1998 (EMC susceptibility and immunity).
The symbols below appear on the ICS-90, or on labels affixed to the
ICS-90.
Alternating current
Protective conductor terminal
Power supply is on
Power supply is off
Indicates a potential hazard. Refer to the operator’s manual for
an explanation of the hazard and how to proceed.
To Next Page
Loading...
