ICS-90 Ion Chromatography System
B-6 Doc. 031851-05 12/04
B.4 Connecting the ICS-90 to the Computer
The ICS-90 rear panel (see Figure B-4) provides a USB receptacle for connecting
the ICS-90 to a USB port on the Chromeleon PC or a USB hub.
1. Locate the USB A-B cable (P/N 960777) in the ICS-90 Ship Kit.
Before connecting the USB cable and turning on the ICS-90 power,
verify that Chromeleon is installed on the PC (see Section B.3).
When Chromeleon is installed first, the USB driver information is
loaded when the power is turned on. Chromeleon then automatically
detects the new USB device. Refer to Installing the Chromeleon
Chromatography Management System with a Dionex Ion
Chromatograph (Document No. 031883) for installation instructions
and for details about USB connections.
Figure B-2. ICS-90 Rear Panel
Main Power
Receptacle
Power Switch
Waste Lines
Liquid Lines
USB
Receptacle
TTL
Connector
To Next Page
Loading...
