UltiMate 3000 Nano and Cap - System Installation and Application
63
8 Accessories and Spare Parts
Dionex accessories and spare parts are always maintained at the latest technical standard.
Therefore, part numbers are subject to alteration. However, updated parts will always be
compatible with the parts they replace.
Please note: The part numbers always refer to the packing unit. Unless stated
otherwise, the packing unit is one unit.
Please note: For more information about which accessories and/or spare parts are
available for the individual modules, refer to the Operating Instructions
for the instruments.
Please note: Use original Dionex spare parts only. Substituting non-Dionex parts or
using non-Dionex accessories may impair the performance of the system.
To Next Page
Loading...
