UltiMate 3000 Nano and Cap - System Installation and Application
61
7 Routine Maintenance
The system modules of the UltiMate 3000 system are made of high-quality components and
materials to minimize maintenance requirements. The painted surfaces, as well as the display,
are relatively resistant to weak acids, alkali, and organic solvents. Nevertheless, immediately
wipe up all liquids spilled onto the modules' surface, using lint-free cloth or paper. If surfaces
are exposed for longer periods, these liquids can cause damage.
The Operating Instructions for the individual instruments provide instructions for shutting down
the instrument and describe all maintenance procedures that can be carried out by the user.
Dionex personnel should perform any additional servicing, as well as anual inspections to detect
contamination, wear, etc. If unexpected problems occur, please contact Dionex Service.
Please note: Before you return any instrument to Dionex for repair, contact Dionex
Service or your local distributor. An RMA (Return Material
Authorization) number is required in order to track your instrument.
Always use the original packaging when shipping the module. Shipping
the instrument in anything other than the original packaging will void the
warranty. Refer to the warranty statement in the terms of sale for more
information.
To Next Page
Loading...
