UltiMate 3000 Nano and Cap- System Installation and Application
48
If you install the modules in a different order, reopen the pump’s and autosampler’s Properties
pages and make the necessary configuration changes.
Fig. 25: Installation of an UltiMate 3000 system in the Server Configuration program
(here: for Preconcentration, or 2D LC Salt Plug)
Please note: The Operating Instructions for the modules also provide an overview of
the different commands and properties supported by Chromeleon for the
respective instrument. For more information, refer to the Chromeleon
online Help and the Chromeleon manuals.
Please note: Operational and/or Performance Qualification allows you to check and
document the quality of your HPLC system. All required materials and
detailed instructions are available from Dionex on request.
To Next Page
