To Next Page
L
lancegeorgeSep 8, 2025
What does PTS shutdown error mean on Directed Control Unit?
- EEmily Salas PhDSep 8, 2025
The PTS output from the module was not activated due to safety protection.
What does PTS shutdown error mean on Directed Control Unit?
The PTS output from the module was not activated due to safety protection.
Why smart key was not detected on Directed Control Unit?
The smart key was not detected, which prevents the system from shutting down the vehicle.
Why speed was detected on Directed Control Unit?
The vehicle was detected as moving, which prevents the system from shutting it down.
What to do if transponder functions were skipped on Directed Control Unit?
(If compatible) when RXT mode is not desired or convenience features are needed, please reset the and reprogram the module.
Why Runsafe was not disabled on Directed Remote Starter?
No UNLOCK command was received before opening the door, or the 45 second timer expired in takeover mode.
Why Directed DS3+ Automobile Accessories transponder functions were skipped?
If compatible, when the RXT mode is not desired or convenience features are needed, please reset and reprogram the module.
What does it mean when my Directed Automobile Accessories says 'MUX not detected'?
The Violet/Green or Violet/Brown wire did not detect the expected voltage value. Check the connections.
What does it mean if OBDII feature is not supported in Directed DS3+ Automobile Accessories?
If the OBDII feature is not supported in your Directed Automobile Accessories, the diagnostic data bus was not detected, therefore the SmartStart features will be limited.
What causes PTS shutdown error in Directed DS3+?
If the Directed Automobile Accessories experiences a PTS shutdown error, it means that the PTS output from the module was not activated due to safety protection.
What to do if ISO 1 is not detected in Directed Automobile Accessories?
If the ISO 1 is not detected in your Directed Automobile Accessories because the Yellow/Black wire did not detect the expected signal, check the connections using the 'Installation (wiring diagrams & vehicle wiring reference charts)'.
General| Type | Remote Start System |
|---|---|
| Smartphone Control | No |
| Range | Up to 3000 feet |
| Connectivity | RF (Radio Frequency) |
| Operating Frequency | 433 MHz |
| Battery Type | CR2032 |
| Button Configuration | 4-button |
| LED Indicator | Yes |
