11
Dual and Single Modes
• Remote TV—Programming from the receiver is delivered to a TV located in another
room using existing in-home coaxial cable and is controlled using Remote Control 2.
The video displayed on the remote TV is always in standard definition (SD). High-def-
inition satellite programming (for example, on channels that display the HD markings)
can be viewed on the remote TV; however, such programs are down-converted for
viewing on the remote TV.
You can tell your receiver is in Dual Mode because the Mode front panel indicator will light
and the menu and other screens on both TVs will display Dual Mode (as shown below).
To Next Page
Loading...
