55
Setting Up a Manual Timer
1 Find the future program you want to record using the Program Guide or Browse Banner. The pro-
gram can be a satellite or over-the-air TV program (see page 98 for instructions on connecting an
over-the-air antenna to your receiver). Note that this feature may not work with all over-the-air
channels.
2 Select the future event. The Create Timer screen displays.
3 Select the Timer Frequency (see page 52 for more details).
4 Select the Timer Type (see page 52 for more details).
5 Select Create Timer to finish making the new event timer.
SETTING UP A MANUAL TIMER
A manual timer lets you set custom start and stop times for a timer.
1 Press the MENU button and select Timers (7).
2 Select Create Timer .
3 Select the Timer Frequency (see page 52 for more details).
4 Select the Timer Type (see page 52 for more details).
5 Select the TV channel (satellite or over-the-air, if applicable). Use the UP/DOWN ARROWS,
PAGE UP/DOWN, or the remote control NUMBER PAD to find the correct channel.
6 Select Edit Timer.
7 Set the Start Time and End Time. Include the right AM/PM indication for each.
8 Set the Date.
9 Select Create Timer .
10 When you are finished, select Done.
To Next Page
Loading...
