12
Dual and Single Modes
Single Mode
Single Mode provides the unique features of your dual-tuner receiver—like Picture-in-
Picture (PIP)—to all connected TVs.
Single Mode delivers the same programming to all of the TVs connected to the satellite
receiver and allows control by either remote control. The format of the programming
shown on the remote TV(s) is standard-definition (SD); high-definition (HD) is shown only
on a compatible nearby TV. High-definition programming (for example, on channels
displaying the HD markings) can be viewed at either TV location; however, such programs
are down-converted for viewing on the remote TV. You can tell you are in Single Mode
because the mode indicator on the front panel will light and the menus and other screens
on all connected TVs will display Single Mode (as shown below).
To Next Page
Loading...
