XWEB5000 Operation Manual
3.9.3.2 SENDING AUTOMATIC REPORTS
It is possible to receive an automatic report according to the user needs. Go to “Configuration” then
“Scheduler”. Choose “Event” and finally “Add system event”. The following window will appear:
In the above example the system will send a report everyday at 09:00 a.m.
For an in deep explanation on Scheduler, please see §3.3.3Scheduler
3.9.3.3 EXAMPLE OF REPORT: E-MAIL
The following picture is an e-mail that the system sends when the CPU temperature ranges are exceeded.
To Next Page
Loading...