dIXEL
Manual de operare Xweb5000
3.9.2 BACKUP – RESTORE
This procedure allows the user to make a data back-up and restore it in case of need. The majority of USB
external storing devices are supported (USB pen-drives memory as far as USB external hard-disks). It is also
possible to back-up the data inside the hard-disk of XWEB or even to the client PC hard-disk.
The restore procedure overwrites the current data inside the XWEB. This means that restoring a back-up will
revert the XWEB to the status saved inside the restore files. It is possible to back-up all the user‟s information
and setup as well as the main graphs recorded values.
Warning: the mass storage USB device must be plugged only for the necessary time to complete the backup-
restore procedure, then it must be unplugged.
3.9.2.1 BACKUP
To start a backup the system must be stopped. Use “Tools” menu, then “Back-up”.
Check the available options and choose a media type. It is possible to select the internal hard disk of XWEB or
a compatible USB external device. The majority of USB external hard-disks are supported, too. If you choose
“Download” all the information will be stored in your hard-disk, this means that if you checked “Main Graph
Data” a standard modem connection is really to slow to download the entire database. Intranet connection is
the only solution for this kind of download. Once you have to select the media type, push next. This window
will appear:
Push “Save” and choose where to save the file. In the following example the file is saved in the “Desktop”.
To Next Page
Loading...
Need help?
General