XWEB5000 Operation Manual
Once a button is password protected, each time someone push it, this window will appear:
If you insert a wrong code, the field reset itself. You can continue inserting a code until you press “Exit”.
JJ) GRID
It helps you to align all the object you want to place in the layer. By choosing this option you can also select
the grid colour.
KK) INSERT DATA OUTPUT EVENT
This feature is intended to let add the user a button for printout event directly from the Layout. It is compulsory
to setup a printout event in the Scheduler (see §Eroare! Fără sursă de referință.Eroare! Fără sursă de
referință.). To add a printout button do the following:
Go to “Insert” menu, then “Insert data output event”
This window will appear:
Go to “Data Output” and pick up your previously setup printing event. Add a name for this new button.
Setup colours, dimensions and size of the button
Place this button on the layout
Each time the button will be pressed, the system will print a sheet with the runtime temperature. Not only
printouts but also e-mail or a fax can be the target of this feature.
3.4.5.2 GLOBAL COMMANDS
This function allows the user to load a windows containing all the global commands previously defined in
the “Global Edit”. In the main page go under Device menu and choose “Global Commands”.
3.4.6 PERFORMANCE METER
The value added by this new software tool is remarkable: possibility to check the correctness of the
compressor rack size; possibility to check the proper functioning of each device; statistics data collection.
To Next Page
Loading...