XWEB5000 Operation Manual
3
3
U
U
S
S
I
I
N
N
G
G
T
T
H
H
E
E
X
X
W
W
E
E
B
B
3.1 SYSTEM LOG-IN
The connection is activated by inserting the IP number into the address bar of your browser.
The first window shows the Login with User Name and Password fields.
If the name and the password are correct the Home Page is loaded otherwise you must repeat the operation:
check your password (numbers, capital letters etc.). Remember that default Administrator can log to the unit
using:
User name: Admin
Password: Admin
Please consider to change the default password to increase system security (anybody can reads this manual
and steals the admin account).
ATTENTION: After the first installation is complete, only Admin user with administrator rights, exists.
Please go to Configuration -> Permission roll-down section to ensure proper security rights to users.
3.2 HOME PAGE
When the Home Page appears the connection is effectively working.
Depending on the used password the User can operate on the server with or without limits decided by the
Administrator of the XWEB.
The user defined as “Administrator” is the only one allowed to modify everything inside the Server. The
To Next Page
Loading...
Need help?
General