dIXEL
Manual de operare Xweb5000
“Status/Alarms” section allows you to customize your instruments, of course the same values have to be set
both on XWEB and the instruments themselves.
“Commands” row is very important. You have to mark same values that you have marked before in the other
section. In order to give XWEB the possibility to send commands to the instruments. This is necessary
because for example if you have changed “Generic Alarm” to “Ausiliary” in “digital Resources” section, then
you have to mark “Aux on” and “Aux off” in “Commands” section to be able to turn on/off the output by means
of the XWEB. Of course you have to do this kind of changes every time you have made some modifications to
the instruments.
Last row “Functions” allows you to link the macro-category previously set, to the particular instrument you are
managing. By defaults all functions are marked.
To Next Page
Loading...