dIXEL
Manual de operare Xweb5000
A brief resume can be found in Appendix C.
Devices in alarm
In case of alarm event the corresponding instrument is signalled with the red blinking description.
Immediately also the message box, on the top of the browser bar, will indicate the alarm situation with a
red “Alarms” label.
Find the complete alarm description clicking on the row blue bar.
A pop up message box will appear, inside you will find the list of the actual alarms that also includes the
starting date of each event.
Send the commands to devices
From the run time page you are allowed to interact with the instruments by sending commands to them.
The user is requested to select the instrument or the instruments to which the command has to be sent.
To do that click into the “Sel.” box to select the instrument.
On the right top side of the browser border will appear a Toolbar which contains the Commands button
and the possibility of selecting or deselecting all the instruments together.
To define the command to send click on “Commands” and immediately a choice list will appear.
For multiple selection of some or all instruments the available commands will be only the common
commands among the instrument selected.
Select the command and click on “Send” button. Before proceeding a message box will tell you how many
instruments are involved.
To Next Page
Loading...