XWEB5000 Operation Manual
Once you fill in the above module, you can proceed selecting the controllers, then press “Create”.
To show a class please select “Performance” then “View Class”:
Class: let you choose between the class you have created before
Circular Data Interval: the sampled data comes from the circular archive (see §3.6.1GENERAL
INFORMATIONDisplay the graphs with XWEB)
Main data interval: the sampled data comes from the main archive (see §3.6.1GENERAL
INFORMATIONDisplay the graphs with XWEB). In this case the user must choose a proper interval
Show: by pressing this button the system will start to compute all the sampled data.
After some moments this new window will appear:
To Next Page
Loading...