PROGRAMMING P SERIES
Page 13 of 100
* "CASH" - CASH COUNTER ROUTINE
This function will show the user the vender historical total cash counted and the resettable cash counted for
each selection for the vender.
Press select button 4 and "CASH"/"####"/"##.##" will show on the display where the 8 "#" characters are
the historical total cash counters that have been recorded. Note: Leading zeros are not displayed. Example:
Display flashes "CASH", then "26", then "2500". This is $2625.00 historical total cash.
Press select button 2 or 3 to display "CA#"/"####"/"##.##" where the character "CA#" is a selection number
and the 8"#" characters are the resettable cash counters for that selection. Note: Leading zeros are not
displayed. Pressing select button 2 or 3 at this time will scroll through the available selection cash counters.
Example: Display flashes "CA1", then "5", then "20.50". This is $520.50 resettable cash for selection #1.
Press select button 1 to return to "CASH"/"####"/"##.##". Press select button 1 again to return to "CASH".
Press select button 2 to scroll to the next routine.
* "SALE" - SALES COUNTER ROUTINE
This function will show the user the vender historical total number of vends and the resettable vends counted
for each selection for the vender.
Press select button 4 and "SALE"/"####"/"####" will show on the display where the 8"#" characters are the
historical total vend counters that have been recorded. Note: Leading zeros are not displayed. Example:
Display flashes "SALE", then "1325". This is 1325 historical vends.
Press select button 2 or 3 to display "SL#"/"####"/"####", where the "SL#" character is a selection number
and the 8"#" characters are the resettable vend counters for that selection. Note: Leading zeros are not
displayed. Pressing select button 2 or 3 at this time will scroll through the available selection vend counters.
Example: Display flashes "SL 1" then "145". This is 145 resettable vends counted for selection 1. Pressing
select button 1 will return to "SALE"/"####"/"####". Press select button 1 to return to "SALE".
Press select button 2 to scroll to the next routine.
* "PRIC" - PRICE SETTING ROUTINE
This function allows the user to set pricing. When Configuration Switch 1 is programmed to "C1 1", multi-
pricing is on and a price for each selection needs to be set.
Press select button 4 and "PR1" will show on the display.
Press select button 4 to set the price on select button 1, "00.00" or current price setting will show on the
display.
Press select button 2 or 3 to change the price setting for selection 1.
Press select button 4 to enter the price selected and the display will return to "PR1".
Press select button 2 to scroll to the next selection you wish to set price. Press select button 4, set the price
and enter the price. Repeat these steps for each select button until all prices are set. Note: Selections go
PR1 through ALL.
If Configuration Switch 1 is programmed to "C1 O", single price, set SPRI1 as described above. The price
entered for SPRI1 will be set for all selections.
Press select button 1 to return to "PRIC".
Press select button 2 to scroll to the next routine.
To Next Page
Loading...