dji Ronin-MX - Upgrade

Ronin-MX User Manual
©
2016 DJI All Rights Reserved.
31
You can view the latest rmware version information on this page. Upgrade the rmware
by following the steps below:
1. Connect the Ronin-MX to your computer via the Micro USB cable and wait until the
indicator LED in the DJI Assistant blinks blue.
2. Click “Upgrade”.
3. Wait for the download to nish.
4. Click “Upgrade” again and then click “Conrm”.
5. Power the Ronin-MX off and then on after the upgrade is complete.
TIPS
Ensure that your computer is connected to the Internet.
Close any antivirus programs and network rewalls.
Ensure that the Ronin-MX is powered on during the upgrade. Do not power off
the Ronin-MX until the upgrade is complete.
Do not disconnect the USB cable during the upgrade.
Upgrade