ZENMUSE L2
User Manual
28
©
2023 DJI All Rights Reserved.
LiDAR Usage Scenario
It is not recommended to use the L2 in scenarios as shown below. Otherwise, the detection
range and accuracy of LiDAR may be reduced leading to point cloud noise or voids.
1. Conditions with low visibility such as rainy or foggy weather.
2. Surfaces with strong reflectivity such as water or transparent surfaces, or fully reflective
objects or street signs in a close range (
<
20 m).
3. The distance between the L2 and the target that need high-precision modeling is less than
30 m.*
* The distance varies depending on the environment and accuracy requirement. For example, point cloud
data of power line scenarios can be recorded from 10 to 30 m.
To Next Page
Loading...
Need help?
General
