7.5. Insert the centrifuge tubes symmetrically onto the rotor in
place without imbalance
Caution:
⚫ Ensure to tighten the rotor to the main shaft firmly and the lid is secured properly on
the rotor. Otherwise, the rotor might fall OFF while the centrifuge is in operation,
resulting in centrifuge or rotor damage.
⚫ Tighten the rotor lid and rotor firmly.
8. Operation
8.1. Normal operation
Turn ON the power switch, the most recent settings will be loaded and shown on the LCD display as in
Fig. 8-1.
Figure 8.1 The most recent settings loaded and shown
◼ The speed set to 5000rpm and the timer set to 10 min.
◼ The lid lock is released.
● Never use the rotor of other brands/ specifications on this centrifuge.
● Do not expose the rotor and its accessories to direct sunlight/Ultraviolet.
To Next Page
Loading...
