Safety Warnings
The symbol is an internationally accepted safety mark. Please carefully read and fully
understand the following safety rules:
⚫ Comply with the operation requirements contained herein and ensure safe operation.
⚫ Carefully read all safety information and reminders provided in this manual.
⚫ Safety information is marked as follows. The safety symbol is combined with the “Warning”
and “Caution” respectively, reminding users of the potential danger. These two combinations and
the “reminder” symbols are defined as follows:
Warning: personal danger.
Warning against potential dangers, which might result in injury or death if the requirements contained
herein are not strictly complied.
Caution: Potential danger to instrument
Ensure to comply with all the safety requirements as mentioned to avoid potential dangers of damage
to the instrument
Reminder: matters that generally call for attention.
⚫ Do not use this centrifuge in any manner not mentioned in this user manual.
⚫ In case of any problem, please contact the vendor/supplier.
⚫ This user manual provides complete details of the potential dangers, however users are advised
to stay alert against unpredictable circumstances and use this centrifuge with care.
Warning:
⚫ This centrifuge is non-explosion proof and may not be used for separation of flammable or
explosive samples.
⚫ Do not install this centrifuge in the vicinity of any flammable gas or chemical substances.
⚫ Do not place anything that causes danger within 30cm radius of this centrifuge.
⚫ Take appropriate safety measures before centrifugation of any toxic, radioactive or pathogenic
organisms. If the microorganism sample being centrifuged is secondary hazard (as defined in the
WHO’s “Laboratory Biosafety Manual”), ensure to use biological sealing devices.
⚫ Ensure to sterilize it according to decontamination procedures that are mentioned under
sterilization section.
⚫ If there is any need for onsite assistance, sterilize and decontaminate the centrifuge in advance and
To Next Page
Loading...
