9
4.Installation
Thissectiondescribestheinstructionsthatyoushouldabidewheninstallthecentrifugeto
ensureyour safety and the optimum performance. Before moving the centrifuge,
the rotor must be removed.
4.1 Location
（1）Place the centrifuge on a firm, flat and level table, ensure the four feet of this
centrifuge stand on the table firmly. Avoid installing on the slippery surface or
surface prone to vibration.
（2）Ideal ambient temperature is 20℃±5℃, avoid placing the centrifuge in direct
sunlight if temperature exceeds 30℃.
（3）Keep clear of the centrifuge at least 10cm on both sides and at least 30cm
behind it to guarantee the cooling efficiency.
（ 4 ） Keep away from heat or water to avoid sample temperature issues or
WARNING：
⚫ Improper power supply may damage centrifuge.
⚫ Make sure the power source conforms to the required power supply before
connecting.
To Next Page
Loading...
