Clockwise rotate to increase parameter values.
counterclockwise rotate to decrease parameter
values. Press down the key, shift between
speed , RCF and time display.
Figure 6-2 the main interface
Main interface is as figure 6-2. The speed is set to be 6000rpm, and the running
time is 30 minutes, acceleration curve is 9, and deceleration curve is 9, memory
program is 7. When speed symbol is rotating, indicating the centrifuge is running,
the rotation is faster, the speed is higher. Time symbol displays the ratio of
working to time setting. The total time setting is divided into 10 scales.
7.RotorPreparation
7.1 Prepare the samples
To Next Page
Loading...
