DLab DM0636 - Page 15

12
Item
Symbol
Name
Function
1
Pulse key
When the door closed, press and hold the key
to accelerate running, release the key to stop it.
2
Open/ lock key
Press the key to open the door The key is not
available when the centrifuge is running.
3
Start/Stop key
Press the key to start running. The centrifuge
will brake to stop running if press the key during
centrifugation.
4
Acceleration key
Press the key to set the acceleration curve.
1: the slowest acceleration. 9: the fastest
acceleration
5
Deceleration key
Press the key to set the deceleration curve.
0: inertial braking. 9: fastest braking.
6
Memory key
Load program: Press the key shortly to load the
program Save program: Press and hold key for
5 seconds.