door off.
⚫ Do not move or relocate this centrifuge while it is running.
⚫ If fluid spills in the rotor chamber, please promptly clean and dry with a dry
cloth to avoid sample contamination.
⚫ Ensure to remove any objects and fragments of the tubes dropped inside the
rotor chamber before running this centrifuge.
⚫ Cautions on rotors
(1) Always check for corrosion and damages on the rotor surface before using it.
Do not use the rotor if an abnormality is found.
(2) Do not set the centrifuge speed beyond the allowable minimum speed of the
rotor kits (rotor or adapters). Make sure to run it below the allowable minimum
speed.
(3) Do not exceed the allowable imbalance.
(4) Use the rotor and tubes within their actual capacities.
(5) If the rotor is attached with a lid, ensure it is tightened before operation.
⚫ If any abnormal condition occurs during operation, please stop it immediately
and contact our service center. Notify the service center is a warning code if
displayed.
⚫ Vibrations are likely to damage the centrifuge, contact our service center if
abnormality observed.
To Next Page
Loading...
