EasyManua.ls Logo

DLab DM0636 - Page 6

DLab DM0636
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
are toxic, radioactive or contaminated with pathogenic micro-organisms at
your own responsibility.
If the instrument, rotor and/or accessories that has been contaminated by
solutions with toxic, radioactive or pathogenic materials, clean it according
to the decontamination procedure that you are specified.
If you require services at site, please sterilize and decontaminate it in
advance, and then notice the service center involved in the details of the
particular materials.
Do not handle the power cord or turn on or off the POWER switch with wet
hands to void electrical shocks.
For safety purposes, do not enter within 30cm around this centrifuge while it
is in operation.
While the rotor is rotating, never forcedly release the door lock.
Unauthorized repairs, disassembly, and other services to the centrifuge
except by our service center are strictly prohibited.
CAUTION
This centrifuge must be located on one firm and level table.
Make sure the centrifuge is horizontal before running.
Make sure the angle between the door and cover is greater than 70 degrees
when open the door.
Be careful not put your fingers or hands between the door and cover when the

Related product manuals