DMM DYN4 Series - Safety, Compliance, and Notations; Safety Notice

2
DMM Technology Corp.
DYN4 AC Servo Drive Instruction Manual
REV. ZM7-A10A
CT1
■ Safety Notice ■
The user or operator should read through this manual completely before installation, testing, operation,
or inspection of the equipment. The DYN4 series AC Servo Drive should be operated under correct
circumstances and conditions. Bodily harm or damage to equipment and system may result if speci-
cations outlined in this document are not followed. Take extra precaution when the following warning
convention is used for certain specications.
■ Notations Used ■
All specication and units of measurement used in the manual are in METRIC:
Mass: Kilogram [kg]
Length: Millimeter [mm]
Time: Seconds [s]
Temperature: Celsius [°C]
WARNING
!
■ Standards Compliance ■
CE
Machinery Directive 2006/42/EC
Low Voltage Directive 2014/35/EU
Electromagnetic Compatibility 2014/30/EU
EN12100:2010
EN 60034-1:2010; EN 60204-1:2006/AC: 2010
EN 61000-6-1: 2007;
EN 61000-6-2:2005/AC: 2005