DMM DYN4 Series - 1 General Specification; Servo Drive Name Plate; Model Designation

5
DMM Technology Corp.
DYN4 AC Servo Drive Instruction Manual
REV. ZM7-A10A
CT1
1.1 Servo Drive Name Plate
1.2 Model Designation
Model Number
Input / Output Specications
Encoder Specication
Protection / Environment
Hardware / Firmware Version
Country of Origin
Lot / Serial Number
*Note the name plate is region specic and may vary between each region model.
DYN4 - H01 A 2 - 00
DMM Servo Drive Series
DYN4 Series
AC Servo Drive
Frame Size
L01 Rated. 3.5A
H01 Rated. 8.0A
T01 Rated. 14.7A
Command Type
A Pulse / Analog / RS232 (DYN232M Protocol)
B Modbus RTU (RS485)
C CAN (DMM Proprietary CAN Protocol)
Supply Voltage
2
100~240VAC
Single/Three Phase
50/60Hz
Model Type
00 Standard
MT1 Multi-Turn
Option
** Custom
1 General Specication