DMP Electronics XR150FC User Guide

System Setup XR150FC/ XR550FC User’s Guide 9
User Me u
Fire C mma d Ce ter User Me u
Many of your system features are included in a User Menu you can
accessfrom the Fire Command Center or the Remote Fire Command
Center. The menu requires you to enter your user code and then
only shows those functions to which you have access.
Some features displayed on the User Menu are not necessary for
the XR150FC/ XR550FCAddressable FireAlarm Control Panel. Please
disregard these prompts and displays. Press the COMMAND key to
skip any displays and prompts not discussed in this User Guide.
Accessin g t h e User Men u
1. Press the COMMAND key, if the multi-language option is
enabled, the available languages display. Press the top row
Select key under the language to use for text display.
2. Press the COMMAND key until MENU? NO YESdisplays.
3. Select YES. The keypad displays ENTERCODE: –. Enter your
user code and press COMMAND. You can now scroll down
through the list of system features available to you.
User Me u o pt i s
The list below shows the User Menu options in the order they
display.
Me u o p t i Descr i pt i
ALARM SILENCE Silences an alarm bell or siren.
SENSOR RESET Resets smoke or glassbreak detectors
that have latched due to an alarm
condition.
OUTPUTSON/OFF Allows you to turn on or off any of the
outputs described in the System Setup
section of this guide.
ZONE STATUS Allows you to see if a zone is either
armed, bypassed, in alarm, open, or
shorted.
SYSTEM STATUS Displays the current condition of the
system AC power, backup battery,
optional panel tamper, and keypad
model and version numbers.
SYSTEM TEST Tests the system siren, communication
to the central station, and backup
battery.
USER PROFILES Allows you to add, delete, or change
user proÀles.
USER CODES Allows you to add, delete, or change
user codes.
TIME Allows you to change the Day, Date, or
Time that is currently programmed in
the system.
DISPLAY EVENTS Allows you to view or print the last
10,000 door accesses or 2,000 system
events that occurred on your system.
SERVICE REQUEST Allows you to send a message to the
Central Station requesting service on
the alarm system.
FIRE DRILL Allows you to test the system Àre bells.
The following pages detail each user menu item and provide
instructions on when and how to properly use them.

DMP Electronics XR150FC Specifications

General

Brand	DMP Electronics
Model	XR150FC
Category	Control Panel
Language	English