5-23
EN
CAUTION!
Do not exceed the maximum harness length or use more than two
extensions. Doing so may cause excessive voltage drop in the CAN bus
and lead to communication failures.
NOTE
• Every harness connection is a potential failure point. Minimize the
number of connections in your system and locate them in dry areas
protected from incidental physical damage.
• Never put connections in inaccessible places like rigging tubes
or conduit.
Figure 5-21. Single Engine, Single Station.
ACTUATOR
EXTENSION HARNESS
CM20036, OR CM22401
PLUS CM 204XX
To Next Page
Loading...
