Brake System
BR-1
Attentions
Use brake liquid of "901-4" to meet the requirements of DOT4.
May use other brand liquids which meet the requirements of DOT4,
but two kinds of liquids are not allowed to mix up for use.
Do not reuse the exhausted and unclean liquid.
Be careful not to spray the liquid to the painted area, this will damage
the painting surface. If the liquid sprayed out to the painted area without
care, wash it immediately with water.
Clean the main pump, sub-pump and brake dump with clean liquid.
The mineral oils as gasoline and coal oil are not allowed to use, they
will damage the rubber parts in the hydraulic system.
Disassemble the brake piping with tools.
Note:
Clean the friction lining with vacuum cleaner to minimize
the air pollution caused by friction material and dust.
To Next Page
Loading...