Electric System
EL-10
Radio Cassette and Antenna
Adjustmen of the antenna rod
Adjust the antenna nutted rod under following condition:
MW (AM) signal can't be received or very weak.
After installing the new antenna, feeder cable, or radio, before the
adjustment, check the connection of harness and antenna or feeder cable
for correctness.
Pull out the antenna completely.
Switch on the radio and tuning to loud the volumn of the speaker.
Round the1400KHz, there is a broadcasting station whose signal is
very weak (nearly can't be heard).
Turn the antenna left and right to find a optimum position for the
receiving result.
Note:
Don't over turn the nutted rod antenna, half circle is allowed.
Antenna position
To Previous Page
Loading...