Electric System
EL-6
Combined Switches
Replacement
It is not necessary to dismount the combined switch base while
replacing each switch.
When dismount the combined switches, first dismount the connecting
bolts.
Front Head Lights
Bulb replacement
The front head light is half sealed, using a replaceable halogen osram
lamp.The lamp can be replaced from the inner end without releasing off
the whole head light assembly.
Hold the plastic bracket while replacing, do not touch the glass cover.
1.Release off the connecting wire harness from the rear end.
2.Turn the bulb anti-clockwise until it loose and off.
3.Open the rubber cover.
4.Be careful not shake or turn the bulb while removing.
5.The steps for installing is just on the contrary of removing.
Note:
Do not place the bulb outside the reflecting cover for long time,
otherwise, dust, gas or smoke will go into the light to affect the function of
the light. So the bulb can be removed only when replacing.
Focus adjustment
Use a focus device, focus screen or head light tester when focusing.
Note:
.Keep all the tires at normal pressure.
To Next Page
Loading...