General
GL-12
As for the other torques not mentioned, please see the standard of DONGFENG EQB-37-1999.
Note:
No locking spacer, but to make sure the required tightening torque.
When tightening during installing, make use of the oil to lubricate. Do not use the bolt with thread
damaged.
Each bolt need to tighten within 2~3 times.
Muffler fixed bolt 32~38
Battery frame and frame connecting part 35~47
Battery pressure lever fixed nut part 19~24
Front bumper and cross member connecting part 19~24
Power steering oil pipe joint nut 30~40
Air filter bracket and longitudinal connecting part 21~28
Power steering pump adjusting nut 25~31
Power steering pump adjusting bolt 19~25
Alternator adjusting lever bolt and nut 13~19
Push lever bolt of clutch master cylinder 8~11
Clutch pedal brake lock locking nut 12~15
Clutch pressure disc and flywheel fixed bolt 25~35
Fan fixed bolt 7~9
Push lever nut of brake thruster 16~22
Part Tightening torque (N.m)
To Next Page
Loading...