Front suspension
FA-23
Lower transverse arm
Diasassembly and assembly
Disassemble the lower fixed nut of the lower shock absorber bracket.
Disassemble the torsion bar spring. See "Torsion bar spring disassembly".
Disassemble the fixed nut of push rod. See "Disassembly and assembly of the push rod".
Disassemble the lower transverse arm ball head pin
from the steering knuckle. See "Front axle--steering
knuckle".
disassemble the lower transverse arm fixed nut.
Dismount the rubber bush of the lower transverse
arm shaft from the frame by the proper tool.
When assembling the rubber bush, wipe some sopy
water on the bush face.
After assembling the lower transverse arm, adjust
the front wheel alignment and vehicle height. See "Front
alignment" of "Examine and repair".
Check
Lower and upper transverse arm
Check the lower and upper transverse arm for damage and crack, replace if necessary.
Lower transverse arm bush
Check the bush for deform or other damage, replace if necessary.
To Next Page
Loading...