Front suspension
FA-26
Vehicle gesture (no load)
Lower transverse arm central height H mm 139~145
No load: full fuel, coolant, lubricant, and original tyre, jack and driver tool, vehicle is parked on the level
ground.
Ball head pin
Hub bearing
Upper ball head pin Lower ball head pin
Swing force A (N)
(Measure position: cotter pin hole)
19.6~122.6 9.8~39.2
Driving torque B (N.m) 1.0~4.9 1.0~3.9
Vertical clearance limit C (mm) 0.1~1.0 0.1~1.0
Hub bearing locking nut
Tightening torque N.m
34~39
Loose locking nut first then tighten again N.m
34~39
Withdrawal angle
45
°~120°
Hub bearing driving moment N.m
9.8~27.5
Axial clearance mm
0
To Next Page
Loading...