●
THRESHOLD: Defines where compression begins. Signals above the threshold are attenuated by an
amount specified by the RATIO parameter above.
●
MAKEUP: Use this to adjust the volume of the output signal, ranging from -10dB to +10dB.
●
ATTACK: Defines how long it takes to reach maximum compression once a signal exceeds the
threshold, ranging from 0.5ms to 30ms.
●
RELEASE: Defines how long the compression reduce to zero after the signal falls below the
threshold, ranging from 100ms, all the way up to 1,200ms.
3. FILE STRUCTURE
3.1 SONG
SONG is the top level file in Essential D1. When powered up,
Essential D1 will load up a SONG which contains all of the settings
needed to get the sound going. The Essential D1 can hold up to 64
SONGs. The first 16 SONGs are pre-loaded factory content
designed by Loopmasters.
Each SONG can hold 1 KIT and 4 BEATs at most via BEAT SLOT
feature. Keep in mind that the SONG file only saves the IDs of the
05 06 07
08 09 10 11 12 13 14
15 16 17
18 19 20 21
22 23 24 25 26 27 28
29 30 31 32
To Next Page
Loading...
