5.5.3 FILTER
Use this parameter to set the MIDI OUT channel. If you want the
Essential D1 to only send MIDI messages to specific channel, set to
the corresponding value.
5.6 BRIGHTNESS
Here you can set the brightness of the RGB lights, ranging from LOW, NORM (Normal) to HIGH.
5.7 FIRMWARE
In this section, you can check the firmware version via the VER. value.
The RESTORE option is used for restoring all the factory content of the Essential D1. And it will also
erase all of the user content. The whole process will takes 2~3 minutes. The Essential D1 will reboot
automatically after the restore.
05 06 07
08 09 10 11 12 13 14
15 16 17 18 19 20 21
22 23 24 25 26 27 28
29
30 31 32
To Next Page
Loading...
