Donner ESSENTIAL D1 - Page 8

Press this button to enter/exit the MASTER FX EDIT page. For navigating, you will need to combine the
VALUE encoder and SHIFT + [BACK].
MASTER FX
18
Holding MUTE | SHIFT + [SOLO] and press the pad(s) in 01A BD - SMP4 PADS section to mute/un-
mute | solo/unsolo the channel(s) you want.
MUTE | [SOLO]
19
● Press this button to enter/exit the BEAT SELECT page, where you can choose and load the sequence
you like.
● Press SHIFT + [EDIT] to enter the BEAT EDIT page, you can change the setting of the selected beat
here.
● Hold the BEAT, then press one of the pads in the 01B [1] - [4] PADS section to switch between 4
different BEAT SLOTS, each BEAT SLOT can hold a BEAT.
BEAT | [EDIT]
13
Press this button to enter/exit the KIT SELECT page, where you can choose and load the drum kit you
like.
KIT
15
Use this button and VALUE encoder to change the BPM and activate/deactivate the METRONOME.
There are two ways to edit the BPM value: 1) constantly tapping TEMPO/TAP at the speed you want
to set the tempo to; 2) press TEMPO/TAP to enter TEMPO EDIT page, turn the VALUE encoder to edit
the BPM (you can hold SHIFT while turning the VALUE encoder to refine the value).
TEMPO/TAP | [METRO]
16
Press this button to enter/exit the MENU page. For navigating, you will need to combine the VALUE
encoder and SHIFT + [BACK].
MENU
17
● Hold this button, while pressing BEAT / KIT to save the beat/kit.
● Use SAVE + BEAT / KIT to cancel the saving and return to the MAIN page.
SAVE
14
05 06 07
08 09 10 11 12 13 14
15 16 17 18 19 20 21
22 23 24 25 26 27 28
29 30 31 32